FREE SHIPPING within the US    NO Handling Fees

Got a 12-valve? 

Got an engine with a P-7100 Pump? 

You need The ADJUSTER 


From optimum economy to max power on the fly from inside the cab! 

The ADJUSTER by Attitude (pat pend) (formerly Attitude Adjuster) gives you FULL fuel control of your 12-valve Cummins or any other engine equipped with a Bosch P7100 injection pump without leaving your seat.  It's a precise system with accurate command of range and fuel output.


<<<<<<<<   AWESOME---Does it all!   >>>>>>>>>>

➢  Adds Power: 10+% increase.

➢  Increased Fuel Economy: 10-25% increases in mpg.

➢  Lower EGT's: 200-250 degrees in the mid ranges.

  More Boost: 3-10 lbs.

➢  Longer Pump Life: great for highly modified or large pumps. Can defuel to under 150 cc’s.

➢  Full rack travel

➢  Controls Smoke

➢  Easy Installation: 30-60 minutes

Using the 3” in-cab controller, you have full precise adjustability with 8 dial settings and mid settings (16 total) through the fuel spectrum with only one rotation of the knob.  This lets you reproduce the exact repeatable fuel setting every time for efficient, consistent operation.  All of this is done while retaining the AFC housing (boost advance) which is crucial for drivability.  

The ADJUSTER has application for improving the performance of trucks from stock to highly modified.  It is flow-bench and dyno proven.  The ADJUSTER housing also comes pre-machined for the shut-off solenoid bracket on ’94-’98 Dodge Rams.

The ADJUSTER is a drop-in part.  It’s a direct replacement of the cam plate and does not require removal of the injection pump. Installation is as simple as swapping a fuel plate.  
Finally there’s a way to control your fueling from the cab.  This product is 100% mechanical.

Included Items:

•  The ADJUSTER by Attitude housing with a #0 fuel profile (additional profiles can be purchased separately)

•  New AFC housing arm machined for full fuel advance

•  Control cable

•  In-cab control box

•  All necessary hardware


Suggested supporting mods:

APP #1007 Billet Rack Cap.  APP’s Rack Cap is manufactured 4mm deeper which provides an additional 20hp.   How?   It allows full 21mm rack travel.

APP #1006 Billet delivery .093 valve holders. The #1006 flows more fuel. It’s also a great way to dress up your injection pump.

Optional Fueling Profiles:  The ADJUSTER is shipped with a #0 profile which is appropriate for most uses, but the following profiles have been precisely machined and are available for very specific applications:


APP #1205 (#5) Recommended for 13mm pumps and all heavily modified trucks

APP #1206 (#6) Recommended for most street trucks with modifications

APP #1208 (#8) Recommended for heavy towing

APP #1210 (#10) Recommended for 913 pumps and all pumps with notched-style plungers, and for stock or lightly modified trucks

Made in the USA

 

THE ADJUSTER Tech Sheet Dyno Run with 12mm Pump
THE ADJUSTER Tech Sheet
      The Adjuster Dyno Test 12mm pump
Flow Chart for 12mm Pump
Flow Chart for 13.5mm Pump
The Adjuster Flow Chart 12mm pump

The Adjuster Flow Chart 13.5mm pump


The ADJUSTER Hero Card

The ADJUSTER by Attitude, In-cab Fuel Controller (formerly Attitude Adjuster)

  • Product Code: 1020
  • Availability: In Stock
  • $469.00
  • $419.00


Related Products